• Quantity:
Total: to quote
Cart is empty.

Wiping filler for pores, black, tin/ 250 g

 Wiping filler for pores, black, tin/ 250 g


Black wiping filler for porous CFRP-surfaces (to seal pinholes)

Technical data:
Density: approx. 1.83 g/cm³
Thinner: on demand with acetone
Drying/curing: could be wiped off at 20 °C in 20 minutes, at 40 °C in 10 minutes

Apply with a cotton cloth or sponge.
Surfaces to be coated must be clean and sanded before with 240 grit sandpaper.

Don´t use solvents to clean the treated surface, only use compressed air and an anti-static cloth to remove the “abrasive dust”.

Then paint with Durelastic clear coat or BascoPrime and BascoClear glossy or matt (see R&G product range).

Storage: 12 months at +10 up to +30 °C

Further information eWiki